MW-222 silicone treatment agent from silicone has properties more difficult with double-sided adhesive bonding adhesive substances. I produced a fast-drying MW-222 silica surface treatment agent a good solution to this problem, making the double surfaces such as plastic and silicone products firmly bonded together. a. Performance Appearance: viscous liquid Ingredients: silicone polymer solution ???? agent: aromatic hydrocarbons storage time: unopened container (≥25 ℃) storage period of six months the scope of application of the two products are widely used in silicon. rubber mats, silicone rubber jewelry and other double-sided adhesive backing. III. Use 1. cleanup clean surface of silicone products, water, and other impurities. 2. The MW-222 coated on the surface of silicone products require bonding, ( If need please painted two times), dry place for several minutes (usually 3-5 minutes) at room temperature. 3. The double-sided pressure-sensitive adhesive, etc. have been coated paper adhered to the treatment agent MW-222 silicone on products, appropriate contact surfaces together with a beat. 4. Practical in 5-8 hours after the strength of 70-80% .24 hours after the highest intensity. If the silicone degree below 30 degrees or 30 degrees, the curing time should be longer, four storage spaces non-fire method of storage, away from heat to prevent static electricity, sunlight (insolation) and crashing; away from fire, acid, alkaline substances and flammable materials. Should have good ventilation, preferably at room temperature below 25oC storage; ambient temperature higher than 25oC straight above will greatly reduce the storage time. V. Packing: 3-15KG