MC-14A, odorless and tasteless curing agent MC-14A vulcanizing agent, excellent dispersibility, curing speed, curing silicon products tasteless, suitable vinyl silicone rubber, polyethylene, ethylene-propylene rubber crosslinking. Ingredients: A, silicone polymer B, active peroxide C, anti-yellowing agent D, other additions ratio: 0.8-1.2% Appearance: Transparent colloid Packing: 20kg / barrel Shelf life: without dismantling sealed bucket can be stored year. Note: 1, this activity belongs peroxide volatile substances, weighed MC-14A to avoid prolonged exposure to the air, mixed with silica gel as soon as possible. Mixing good silicone application film wrapped, avoid open display. It is best to park at low temperatures. Sizing recommendations within 12 hours run out, or need to add MC-14A remill bridging agent again. 2, should pay attention to the packaging bag fastened to prevent volatile actives. 3, the cross-linking agent is very sensitive to static electricity fire, mixing confidential ground wire when mixing. MC-14A should be divided in batches, in order to avoid direct contact with MC-14A metal roller friction fire, it is recommended to use plastic wrap after MC-14A, then add two roll mixing. Storage: Storage spaces fire, away from heat, to prevent static electricity, sunlight (insolation) and crashing; away from fire, acid, alkaline substances and flammable materials. Should have good ventilation, preferably at room temperature below 25oC storage; storing a large number of the product, reducing non-product contact, rust, heavy metals and acid and alkaline substances and flammable materials.